Is Your Cooling System Installed Properly? measureQuick check it
July 18, 2017
If your air conditioner is blowing cool air that’s all that matters, right? Not so fast.
As many as two-thirds of central air conditioners or central heat pumps are improperly installed, repeated national studies have shown. Ensuring proper installation can mean the difference between efficient, cost-effective cooling and expensive repair bills.
So what’s the issue?
There are two components that need to be configured properly upon installation – the refrigerant charge and the airflow. These should be calibrated specifically to the home where the cooling system is installed.
Air conditioners come with a factory standard refrigerant charge of 15 feet of line set. If the distance between the outdoor and indoor units is 15 feet, this would be ok, but typically they’re farther apart and require additional refrigerant.
Undercharging can overheat the compressor, while overcharging can flood the compressor. Either way, incorrect refrigerant charge increases the likelihood of equipment malfunction and decreased cooling capacity and efficiency.
High-efficiency air conditioners feature adjustable speed blowers that regulate airflow, but if these are left at factory default settings rather than set at the appropriate speed for your home or duct system, your comfort can become compromised.
If set too high, your system will struggle to dehumidify as it cools, leaving your house with that clammy feeling. If set too low, your air conditioner will need to run longer to reach a cool temperature and could also result in ice build-up and a damaged compressor to boot.
The Solution? measureQuick
measureQuick is Mass Save’s cooling system installation verification service. HVAC professionals are trained in the proper set-up techniques that help homeowners maximize equipment efficiency, energy savings, cooling system lifespan, and home comfort.
If you are upgrading to new, efficient cooling equipment, a measureQuick trained contractor will put you on the right track toward savings and comfort. Find a contractor today by clicking here.Heating & Cooling
You May Also Like
Cinco formas de melhorar a eficiência do seu sistema de aquecimento a gás
Desde pequenos complementos a grandes alterações, apresentamos em seguida cinco formas de atualizar o seu sistema de aquecimento a gás, para ficar com uma casa mais confortável e contas de gás mais baixas.
O Empréstimo HEAT da Mass Save® torna as poupanças de energia mais acessíveis
Para tornar as soluções de poupança de energia mais acessíveis para todos os residentes de Massachusetts, os Patrocinadores da Mass Save estão a disponibilizar financiamento através do Empréstimo HEAT com condições de pagamento generosas.