Five Ways to Avoid the Scare of High Energy Bills with Water Heater Tips

October 31, 2017

Want to avoid things that go bump in the night? You’ll have a hard time doing that when the trick-or-treaters roll around. But for the other 364 days of the year, bumps in the night – or clanks or bangs – are signs your water heater is about to break. That’s a “trick” you definitely don’t want.

By showing your water heater a little TLC, you can extend its useful life, improve its efficiency, save money on your energy bills, and have plenty of hot water to enjoy.

Here are five easy ways you can do just that:

Perform a visual inspection.
Look for signs of leaks in the area around your water heater, the relief valve, and pipes. You’ll want to call a plumber if you see even the slightest evidence of leaking. Otherwise you may be in for a big problem – and big, expensive headache – later.

Lower the temperature.
There is a good chance your hot water is actually too hot. The manufacturer’s default temperature on your water heater is typically higher than you need it to be. You can adjust it to 120 degrees to have plenty of hot water while also keeping your energy use in check. Depending on how high the temperature is set before you lower it, you could reduce energy use anywhere from 4% to 22% with a simple adjustment.

Insulate your water heater tank.
When you touch the surface of your water heater, does it feel warm? If so, that means it’s losing heat and wasting energy. An insulated blanket for your water heater tank costs about $30 and can help you save up to 16% in water heating energy costs annually.

Insulate hot water pipes.
Heat can also be lost through your pipes. You can reduce heat loss by as much as 4 degrees with pipe insulation, which means you can keep the temperature of your water heater lower to save more energy. This relatively inexpensive project is easy and can result in 4% energy savings – every little bit helps!

Know when to replace.
If your water heater is 10 years old or older, it’s getting close to the time to replace it. ENERGY STAR® certifies water heaters of all types (gas storage, electric storage, electric heat pump, gas tankless, solar) that feature the latest technology that results in ample hot water at a fraction of the energy use.

Ready for a new water heater? Mass Save offers rebates of up to $800 on high-efficiency options. To learn more, please select the fuel you use for water heating: natural gas, oil, propane, or electricity. You may even qualify for 0% financing with a Mass Save HEAT Loan.

Heating & Cooling
Personalized Energy Saving Solutions

MyEnergy provides customized content based on your location and energy needs.


You May Also Like

August 22, 2018 RESIDENTIAL BLOG
It Pays to Be Proactive: Get Rebates up to $3,250 on Early Heating and Cooling Equipment Replacement

The heating and cooling equipment in your home lose efficiency as they age. Even if your older air conditioner still works, for example, it’s probably using more energy to cool your home than it did when it was first installed, leading to higher energy bills.

August 08, 2018 RESIDENTIAL BLOG
What You Need to Know Before Installing a New Cooling System

If you’re in the process of choosing a new central air conditioner or central heat pump, there are two important considerations to maximize home comfort, efficiency, and energy bill savings